Click a thumbnail to switch. Click main image for full resolution.
Tire Shredder Knife
SKU: GSK-002
Request a Quote
Product overview
Tire Shredder Knife is built for tire and rubber shredding and mixed scrap size reduction. Available in SKD11 / Cr12MoV / 9CrSi for mixed-feed shredding and steady replacement life. The profiled body suits fixed or rotary stations where alignment and edge exposure matter.
- Tire and rubber shredding
- Mixed scrap size reduction
- Industrial shredder maintenance
- Recycling line spare parts
Materials & heat treatment
Nominal chemical grades listed below are starting points. Final hardness band and sub-zero / temper protocol are matched to your material stream (filled vs. unfilled plastic, wood species moisture, etc.). Mention your current failure mode—chipping, polishing, or heat checking—in the inquiry form.
SKD11 / Cr12MoV / 9CrSi
Specification table
| Product family | Industrial Shredder Knives and Cutters |
|---|---|
| Material | SKD11 / Cr12MoV / 9CrSi |
| Subcategory | Tire and rubber shredder knife |
| Profile | Profiled industrial knife |
| Typical applications | Tire and rubber shredding / Mixed scrap size reduction / Industrial shredder maintenance / Recycling line spare parts |
| Supply mode | Custom replacement, repeat order, or OEM-equivalent matching by sample/drawing. |
| Matching method | Quote from sample, measured drawing, DXF/PDF, or installed-knife photos before production confirmation. |
| RFQ dimensions to confirm | Length, width, thickness, bolt-hole pattern, center distance, edge angle, bevel direction, and one photo with a ruler. |
| Before shipment | Material grade, edge finish, hole position, and packing photos can be confirmed before shipment. |
Expert selection notes
Tire Shredder Knife should be treated as a replacement knife reference inside the Industrial Shredder Knives and Cutters family, not as a universal standard size. For a reliable quote, confirm the installed position, edge direction, hole pattern, thickness, and the photos of the used knife before choosing steel grade or heat treatment.
If the blade works against a fixed bed knife, counter knife, screen, die plate, or anvil, send photos of both sides of the cutting pair. Most premature wear or dust problems come from the full cutting system, not from the moving knife alone.
Drawing & OEM matching
For production intent, share PDF/DXF drawings or high-resolution photos with a scale reference. Leader Blades cross-checks mounting geometry against similar profiles in the Industrial Shredder Knives and Cutters before confirming material and delivery week.
Detailed Application Guides
Waste Tire and Rubber Recycling Knives
Source-backed guide for shredder cutters and rubber granulator blades used on tire reduction, liberation, and crumb-rubber lines.
Open guideTire Recycling Shredder and Granulator Knives
Source-backed guide for shredder cutters, rasper-stage knives, and granulator knives on tire chip, steel-liberation, and crumb-rubber lines.
Open guide
