Click a thumbnail to switch. Click main image for full resolution.
Fluted Pelletizer Cutter
SKU: PPB-008
Request a Quote
Product overview
Fluted Pelletizer Cutter is built for pelletizer head rebuilds and feed roller replacement. Available in D2 / SKD11 / M2 / HSS for clean pellet cut quality and steady service life. The profiled form matches rotating cutter drums, hob heads, or feed-roll assemblies.
- Pelletizer head rebuilds
- Feed roller replacement
- Compounding pellet production
- Pelletizer maintenance inventory
Materials & heat treatment
Nominal chemical grades listed below are starting points. Final hardness band and sub-zero / temper protocol are matched to your material stream (filled vs. unfilled plastic, wood species moisture, etc.). Mention your current failure mode—chipping, polishing, or heat checking—in the inquiry form.
D2 / SKD11 / M2 / HSS
Specification table
| Product family | Pelletizer Knives and Cutters |
|---|---|
| Material | D2 / SKD11 / M2 / HSS |
| Subcategory | Strand or die-face pelletizer blade |
| Profile | Profiled rotor knife |
| Typical applications | Pelletizer head rebuilds / Feed roller replacement / Compounding pellet production / Pelletizer maintenance inventory |
| Supply mode | Custom replacement, repeat order, or OEM-equivalent matching by sample/drawing. |
| Matching method | Quote from sample, measured drawing, DXF/PDF, or installed-knife photos before production confirmation. |
| RFQ dimensions to confirm | Length, width, thickness, bolt-hole pattern, center distance, edge angle, bevel direction, and one photo with a ruler. |
| Before shipment | Material grade, edge finish, hole position, and packing photos can be confirmed before shipment. |
Expert selection notes
Fluted Pelletizer Cutter should be treated as a replacement knife reference inside the Pelletizer Knives and Cutters family, not as a universal standard size. For a reliable quote, confirm the installed position, edge direction, hole pattern, thickness, and the photos of the used knife before choosing steel grade or heat treatment.
If the blade works against a fixed bed knife, counter knife, screen, die plate, or anvil, send photos of both sides of the cutting pair. Most premature wear or dust problems come from the full cutting system, not from the moving knife alone.
Drawing & OEM matching
For production intent, share PDF/DXF drawings or high-resolution photos with a scale reference. Leader Blades cross-checks mounting geometry against similar profiles in the Pelletizer Knives and Cutters before confirming material and delivery week.
Detailed Application Guides
PE Film Recycling Knives
Commercial application guide for shredder knives, cutter-compactor blades, granulator knives, bed knives, and pelletizer cutters used on PE film lines.
Open guidePP Woven Bag and Raffia Recycling Knives
Source-backed application guide for shredder, compactor, granulator, bed-knife, and pelletizer blade selection on PP woven sack and raffia recycling lines.
Open guidePP and PE Compounding Pelletizer Knives
Source-backed application guide for pelletizer blades, strand cutters, and die-face knife RFQs on PP and PE compounding and recycling lines.
Open guide
