Leader Blades — logoLeader Blades
กลับไปหน้า Applications

PET Thermoform Tray Recycling Knives

Granulator rotor knives, bed knives, stator knives, and profile crusher blades for PET trays, clamshells, cups, and thermoforming skeleton scrap.

For PET trays, clamshells, cups, and thermoform skeleton wasteConnects knife choice to bale quality, fines, and cutting noise symptomsRFQ from old sample, dimensions, or machine model
PET thermoform tray recycling knives and granulator blades

Typical thermoform line problems behind the RFQ

  • •Tray flakes turn dusty or stringy after the last knife change
  • •Skeleton regrind gets noisy and bed-knife wear is uneven
  • •The buyer needs replacement knives from a worn sample without a full OEM drawing

Why PET thermoform recycling needs matched rotor and bed knives

NAPCOR notes that PET bale specs now cover PET bottles, bottles with thermoforms, and PET thermoforms, and that trays and clamshells can be recycled when collection and processing systems are in place.

Where these knives sit on tray and skeleton lines

Rapid ThermoPRO is described for low-noise granulation of thermoformed skeletal waste with easier knife replacement access. Compare plastic granulator knives, bed knives, and crusher blades.

What to send for a thermoform knife quotation

Send tray material, sheet thickness, machine model, moving/fixed knife position, dimensions, hole pattern, and old blade photos. If dust or noise increased, review the knife-gap checklist and use the contact form.

หมวดสินค้าที่เกี่ยวข้อง

ใบมีดกรานูเลเตอร์พลาสติกใบมีดฐานกรานูเลเตอร์ใบมีดเครื่องบดพลาสติก

บทความที่เกี่ยวข้อง

Granulator Knife Gap Checklist: Reduce Dust, Fines, and Noise

A practical rotor-to-bed-knife inspection flow for recyclers seeing dusty regrind, noisy cutting, or repeated knife damage after a blade change.

อ่านบทความ

เลือกมีดเครื่องย่อยพลาสติกอย่างไร

เกรดวัสดุ ความเข้ากันได้ของเครื่อง และประเภทสาย—พร้อมชี้สินค้าในแคตตาล็อก

อ่านบทความ

PET thermoform tray recycling knives FAQ

Can PET trays and clamshells be recycled?+
NAPCOR says PET clamshells, trays, cups, and similar non-bottle packaging can be recycled if the right collection and processing systems are in place.
Which knife positions should be checked when tray regrind gets dusty?+
Inspect the rotor knife and bed or stator knife together, because fines and noise often come from the stationary edge or clearance, not only rotor steel grade.
Can you quote from a worn thermoform knife sample?+
Yes. Send old knife photos, key dimensions, hole spacing, sheet thickness, machine model if known, and whether the blade is moving or fixed.

Primary sources used on this page

External claims were limited to these official references and then mapped to the RFQ workflow below.

NAPCOR

PET Design & Bale Spec Guidelines

Defines PET bale categories including PET thermoforms and states trays/clamshells can be recycled when suitable systems exist.

View source

Rapid Granulator

ThermoPRO

Describes low-noise granulation of thermoformed skeletal waste and easier access for knife replacement.

View source

Need PET tray or thermoform skeleton knives checked against your old sample?

Send moving and fixed knife photos, sheet thickness, machine model, hole spacing, and the symptom you see in tray flakes or skeleton regrind.

Request a PET thermoform knife quote